KNC-PLC-K205E

KNC-PLC-K205E | Anaheim Automation, Inc.

Information

The PLC-K205E series provides special I/O functions, a Micro USB (USB 2.0) programming port, 4 high-speed counters, 3 high-speed pulse outputs, two RS485 communication ports, integrated digital input and output channels, and more. The high speed counters come in 10 different operation modes, support a single-phase frequency up to 50 KHz, and a dual-phase (A/B phase) frequency up to 50 KHz. In the 10 different modes, each counter has its own inputs for clock, direction control, start and reset, and has a 32-bit present value. The built-in high-speed pulse outputs can reach a maximum frequency of 50 KHz, and support PWM. The free KincoBuilder software provides absolute and relative positioning, homing, jogging, and quick stop instructions. The PLC-K205E series is an ideal hub for data processing with field devices, such as temperature modules, servo drives, field busses and more.

Note: It is highly recommended to purchase a Micro USB Cable, AAUSB-ABMICRO-6, to properly connect to the HMI/Computer.

  • CPU Module
  • Four High Speed Counters
  • Modbus RTU Networking (Master/Slave)
  • Real Time Clock
  • 3 Pulse Train Outputs / Pulse Width Modulation
  • Transistor Output
  • Multiple Communication Ports: 1 Micro USB, 2 RS485
  • Rated Input Voltage DC 24V
  • 8 Direct Input, 8 Direct Output, and 6 Direct Input/Output
  • 20 Modes and Inputs of High-Speed Counters
Loading...